HR3210C SDS Plus AVT Rotary Hammer Drill 850W 110V

The Makita HR3210C SDS Plus AVT Rotary Hammer Drill has 3 modes of operation: Rotary drilling, Hammer drilling or Chiseling. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling.

It has a soft start operation to ensure a smooth and even start every time, and the torque limiter stops the drill when the bit hits against reinforcements. It also has a built in job light.

It features the unique Makita AVT Anti-Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration.

Supplied with; a side handle, depth stop, bit grease and a carry case.

Specifications:

Input Power: 850W
No Load Speed: 315-630/min.
Impact Rate: 1,650-3,300/bpm
Impact Energy: 5.0 joules
Capacity: Concrete 32mm, Core Diameter (TCT) 90mm
Weight: 5.2kg